ASSEMBLY

INSTALL SEAT (See Fig. 2)

Adjust seat before tightening adjustment bolt.

Remove adjustment bolt, lock washer and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolts are positioned over the large slotted holes in pan.

Push down on seat to engage shoulder bolts in slots and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjust- ment bolt, lockwasher and flat washer loosely. Do not tighten.

Lower seat into operating position and sit in seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment bolt securely.

SEAT

SEAT PAN

SHOULDER

BOLTS

02617

FLAT WASHER

LOCK

WASHER

02616

ADJUSTMENT BOLT

FIG. 2

CHECK BATTERY (See Fig. 3)

Lift seat pan to raised position.

If this battery is put into service after month and year indicated on label (label located between terminals) charge battery for minimum of one hour at 6-10 amps. (See "BATTERY" in MAINTENANCE section of this manual for charging instructions).

SEAT PAN

LABEL

TERMINAL

TERMINAL

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing clutch/brake pedal.

Place gearshift lever in neutral (N) position.

Roll tractor forward off skid.

Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been com- pleted.

Check engine oil level and fill fuel tank with gasoline.

Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

Place gear shift lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine.After engine has started, move throttle control to idle position.

Depress clutch/brake pedal into full “BRAKE” position and hold. Move gearshift lever to 1st gear.

Slowly release clutch/brake pedal and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place gearshift lever in neutral position.

Turn ignition key to “OFF” position.

Continue with the instructions that follow.

7

Page 7
Image 7
Weed Eater WET2242STD manual Install Seat See Fig, Check Battery See Fig

WET2242STD specifications

The Weed Eater WET2242STD is a powerful and versatile string trimmer designed to meet the needs of both homeowners and landscape professionals. This reliable tool offers a perfect blend of performance, ease of use, and innovative features that make it an excellent choice for tackling even the toughest yard maintenance tasks.

One of the standout features of the WET2242STD is its robust 22cc, 2-cycle engine. This powerful engine provides ample power to cut through dense vegetation, making it an ideal choice for trimming grass, weeds, and overgrown areas. The engine's lightweight design contributes to reduced fatigue during extended use, allowing operators to work comfortably for longer periods.

The trimmer features an adjustable curved shaft, which ensures versatility in handling different tasks while providing optimal balance and reduced vibration. This design allows users to easily maneuver around flower beds, rocks, and other obstacles, making trimming more efficient and enjoyable. The WET2242STD also incorporates a dual-line feed system, which automatically advances the cutting line as needed, ensuring consistent cutting performance without interruptions.

Durability is a key characteristic of the WET2242STD. Its high-quality construction is built to withstand the rigors of regular use, featuring components that are resistant to wear and tear. The trimmer is also equipped with a protective shield that enhances safety while providing protection against debris.

In terms of technology, the WET2242STD utilizes an easy-start system that simplifies the process of getting the unit running, reducing the time and effort required to start the engine. This feature is especially beneficial for those who may be new to using string trimmers, as it minimizes frustration and ensures a quick start-up with minimal fuss.

Another noteworthy aspect of the WET2242STD is its user-friendly design. The trimmer is equipped with an ergonomic handle that provides a comfortable grip and reduces strain on the hands during operation. This thoughtful design feature enhances user control and precision when navigating around tight spaces.

Overall, the Weed Eater WET2242STD is a reliable, high-performance string trimmer that combines an efficient engine with user-friendly features. Its lightweight design, adjustable shaft, and automatic line feed system make it an excellent addition to any lawn care toolkit. Whether you're a homeowner looking to maintain your yard or a professional landscaper, the WET2242STD delivers impressive results with every use.