electrolux 27
Instructions for the Installer
The instructions given below are designed specifically for a qualified installer and should aid him or her to perform all installation, adjustment, and maintenance operations with absolute precision and in compliance with all current legislation and regulations. We strongly recommend that all operations for the installation of your cooker be carryed out by Qualified Personnel in accordance with existing rules and regulations.
Electrical connection
Prior to making the electrical connection, make sure that:
-theprotectionfuseandthedomesticwiringsystem are suitable to carry the total electric load of the oven (see rating plate);
-yourdomesticwiringsystemhasanefficientearth connection in compliance with rules and laws in force;
-thewallsocketortheomnipoleswitchusedforthe electrical connection can easily be reached after the oven is built in.
This appliance is delivered without an electric supply cable, therefore, you will have to fit to it a supply cable with standard plug, suitable for the total electric load shown on the rating plate. The plug is to be inserted into a suitable wall socket. If you require a direct connection to the electric network (mains), it will be necessary to fit between the appliance and the mains an omnipole switch, with a minimum gap between contacts of 3 mm, suitable for the required load and in compliance with rules in force. The green & yellow ground wire must not be interrupted by the switch, and should be
27