Installation

2.5 Installation Testing

The Unity 4600 has a number of installation tests that may be performed from the front panel. From the Home screen, press the right arrow until the Installation Testing screen is displayed.

RF input

This test is used to verify an RF connection to a properly functioning LNB at any RF port.

check

Perform the check as follows:

 

1.

Press ENT from the Installation Testing screen to bring up the RF Input Check screen.

 

2.

Press ENT again to display the input level estimate at RF Port 1. This will be an average of

 

 

the estimated levels at each of the twenty-four domestic transponder center frequencies.

 

3.

Press the right-arrow button repeatedly to display the input levels at RF Ports 2, 3, and 4 as

 

 

well.

 

4.

Press ESC to return to the RF Input Check screen.

Audio/video This test puts out a video test pattern and audio test tones to allow verification of video and

check audio connections. The video pattern is vertical color bars. On Port 1, the audio is a slowly pulsing (triangle-wave) tone with a higher frequency on Right than on Left. On Port 2, the audio is a slowly pulsing (sine-wave) tone also with higher frequency on Right than on Left. On each port, the audio tones alternately pulse (~1 second) left then right, then repeat. Use the following steps to enable or disable this audio/video test mode:

1.From the RF Input Check screen, press the right-arrow button to bring up the Audio/Video Check screen.

2.The Audio/Video Check screen will indicate that the test mode is either "Enabled" or "Disabled".

3.Press ENT to switch the test mode between "Enabled" and "Disabled".

4.Press the left-arrow button to return to the RF Input Check screen or ESC to return to the Installation Testing screen.

DTMF Setup This test allows the setup of DTMF tone levels and verification of connections to cue equipment.

Note: DTMF output capability not offered on equipment manufactured after 10/22/07.

Use the following steps to set the DTMF level:

1.From the Audio/Video Check screen, press the right-arrow button to display the DTMF Setup screen.

2.Press ENT to display the DTMF Test Tone screen and begin output of the DTMF test tones. The tones (actually tone-pairs) are played out at about one-second intervals from 1 through 9, 0, *, #, A, B, C, D, and then repeating.

3.Press the arrow buttons to adjust the volume. Up-arrow or right-arrow to increase volume, down-arrow or left-arrow to decrease volume. The number of black squares on the LCD indicates the current volume.

24

800032-01 Rev. G

www.wegener.com

Page 30
Image 30
Wegener Communications 4600 manual Installation Testing, RF input, Check

4600 specifications

Wegener Communications 4600 is a state-of-the-art digital satellite receiver designed for high-performance applications in the broadcasting and telecommunications sectors. This advanced receiver is part of Wegener's renowned line of products, catering to a range of broadcasting needs, from television to data communications. The Wegener 4600 offers a host of features that make it an attractive choice for both broadcasters and service providers.

One of the key features of the Wegener 4600 is its robust satellite reception capability. It supports a wide range of satellite frequencies and protocols, ensuring reliable connectivity in various scenarios. The device is engineered to work seamlessly with the DVB-S and DVB-S2 standards, which allow for efficient compression and transmission of high-definition video content. This ensures that users can deliver high-quality broadcasts with minimal latency, an essential factor in today's fast-paced media landscape.

Another standout characteristic of the Wegener 4600 is its versatile encoding and decoding capabilities. It supports a variety of video and audio codecs, including MPEG-2, MPEG-4, and AAC, among others. This flexibility enables content providers to choose the best formats for their specific needs, enhancing the viewer's experience while optimizing bandwidth usage.

The Wegener 4600 also features advanced management and monitoring capabilities. Through its user-friendly interface, operators can easily configure settings, monitor performance metrics, and manage multiple streams. This functionality is crucial for maintaining optimal performance and ensuring the reliability of the broadcast.

In terms of connectivity, the device supports various interfaces, including ASI and IP, enabling integration with existing broadcast infrastructures. This adaptability is a significant advantage for organizations looking to upgrade or expand their capabilities without extensive redesigns of their current systems.

Security is another key aspect of the Wegener 4600. It incorporates robust encryption options that protect content from unauthorized access and piracy. This feature is increasingly important as the demand for secure transmission of sensitive data grows.

Overall, Wegener Communications 4600 stands out in the crowded market of digital satellite receivers. With its combination of superior reception capabilities, versatile encoding options, advanced management features, and strong security protocols, it represents an ideal solution for broadcasters and telecommunications providers seeking to enhance their service offerings and deliver high-quality content to viewers worldwide.