Weider 831.159301 user manual Bracket

14. Wrap the Long Cable (23) over a “V”-pulley (6).	14
Attach the “V”-pulley and a Long Cable Trap (50)
to the Front Upright (42) with an M10 x 58mm		6	7
Bolt (7) and an M10 Nylon Locknut (21). Make	42
sure that the Long Cable Trap is positioned to
hold the Cable in the groove of the “V”-pulley.			50
		23
		21
15. Route the Long Cable (23) around a “V”-pulley	15
(6). Attach the “V”-pulley and a Long Cable Trap
(50) to the Left Arm (47) with an M10 x 58mm
Bolt (7) and an M10 Nylon Locknuts (21). Make		7	50
sure that the Long Cable Trap is positioned to		6
hold the Cable in the groove of the “V”-pulley.
Repeat this step with the Right Arm (48).			23
			47
		21
	48
	47
16. Route the Long Cable (23) over the 90mm Pulley	16
(15) attached to the Pulley Bracket (20). Make
		68
sure that the Cable Trap (66) is oriented to
hold the Cable in the groove of the Pulley.	20
Tighten the M10 x 48mm Bolt (12) and the M10
	21	15
Nylon Locknut (21).
		66
Properly tighten the M8 x 117mm Bolt (68) and a	3	12
			55
M8 Nylon Locknut (3) attaching the Pulley
Bracket (20) to the bracket on the Top Frame	23
(55). Do not overtighten the Locknut; the
Pulley Bracket must be able to pivot easily.			Bracket
17. Wrap the Long Cable (23) under a 90mm Pulley	17
(15). Attach the Pulley and a Cable Trap (66) to
the indicated hole in the Long “U”-bracket (57)
with an M10 x 48mm Bolt (12) and an M10 Nylon		23
Locknut (21). Make sure that the Cable Trap is
oriented to hold the Cable in the groove of the	15	66
Pulley.
	12	21
		57
	10