Weider 831.159301 user manual Seat Assembly

18.Route the Long Cable (23) over the 90mm Pulley (15). Tighten the M10 x 45mm Bolt (83) and the M10 Nylon Locknut (21).

19.Attach the Long Cable (23) to the Small “U”- bracket (67) with an M8 Nylon Locknut (3) and an M8 Washer (8). See the inset drawing. Do not overtighten the Locknut; it should be threaded onto the end of the Cable so that two threads are showing past the nut.

Attach the Small “U”-bracket (67) to the Weight Tube (63) with an M8 x 45mm Bolt (72) and an M8 Nylon Locknut (3).

Seat Assembly

20.Attach the Backrest (41) to the Front Upright (42) with two M6 x 65mm Screws (43) and two M6 Washers (10).

18
21	55
	Bracket
	15
	83
	23
19	23
	3
23	67
	3
67
72	8
63	3
20
41
	43
	10
	42
	43
	10

11