CABLE ASSEMBLY
38.Attach the Rear Cable (87) to the Leg Lever (15) with a 5/16” x 3” Bolt (92), a 5/16” Washer (20), a 5/8” x 9/16” Bushing (61) and a 5/16” Nylon Locknut (40).
39.Find the Low Cable
The ball on the Cable must be on the side shown. Tighten the 3/8” x 2” Bolt (50) and 3/8” Nylon Locknut (not shown).
40.Wrap the Low Cable (89) around a “V” Pulley (81). Slide the “V” Pulley and a Large Cable Trap (83) onto the 3/8” x 4” Carriage Bolt (57) in the Weight Base (14). Tighten a 3/8” Nylon Locknut (42) onto the Carriage Bolt.
41.Wrap the Low Cable (89) around a 3 1/2” Pulley (82). Attach the Pulley to the bracket on the Weight Base (14) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Locknut (42).
18
38 |
|
15 |
|
87 | |
40 |
|
61 |
|
20 | 92 |
| |
39 |
|
| Row Tube |
| 89 |
| 97 |
| 79 |
| 50 |
| Ball |
40 |
|
42 | 89 |
| |
83 |
|
81 | 57 |
| |
14 |
|
41 |
|
| 89 |
50 |
|
| 82 |
| 42 |
14 |
|
