CABLE ASSEMBLY
52.Wrap the Press Cable (88) around a “V” Pulley (81). Attach the “V” Pulley to the upper bracket on the Leg Press Upright (4) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Jam Nut (43).
53.Wrap the Press Cable (88) around a 3 1/2” Pulley (82). Attach the Pulley and a Cable Trap (80) to the indicated hole in the Press Frame (12) with a 3/8” x 3 1/2” Bolt (66), a 3/8” Washer (38) and a 3/8” Nylon Locknut (42). Be sure that the Cable Trap is turned to hold the Cable in place and that the Cable is between the Pulley and the cross- bar on the Press Frame.
54.Wrap the Press Cable (88) around a “V” Pulley (81). Attach the “V” Pulley to the lower bracket on the Leg Press Upright (4) with a 3/8” x 2” Bolt (50) and a 3/8” Nylon Jam Nut (43).
55.Wrap the Press Cable (88) around a 3 1/2” Pulley (82). Attach the Pulley and a Cable Trap (80) to the Leg Press Arm (9) with the 3/8” x 4 1/2” Bolt (74).
Slide another 3 1/2” Pulley (82) with a Cable Trap (80) onto the 3/8” x 4 1/2” Bolt (74). Hand tighten a 3/8” Nylon Jam Nut (43) onto the Bolt. Do not fully tighten the Nylon
Locknut until step 57.
52 |
|
|
|
| 50 |
|
|
| 81 |
| |
| 4 |
|
|
|
| 88 |
|
43 |
|
|
|
53 |
|
|
|
|
| 66 |
|
| 88 |
|
|
| 82 | 38 |
|
42 | Crossbar |
| |
80 |
|
|
|
| 12 |
|
|
54 |
|
|
|
| 4 |
|
|
| 81 |
|
|
| 88 |
| |
43 |
|
|
|
| 50 |
|
|
55 |
|
|
|
|
| 82 | 43 |
|
|
| 80 |
88 |
| 9 |
|
|
|
| |
74 | 82 |
|
|
80 |
|
| |
|
|
| |
22
