Wrap the Low Cable 47 around a 90mm Pulley | Weider 831.159821

41.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

42.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

43.Wrap the Low Cable (47) around a 90mm Pulley

(38). Attach the Pulley and a Cable Trap (91) to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an M10 x 50mm Bolt (62) and an M10 Nylon Locknut (70).

Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

44.Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Right Base (1) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70).

41
	47
	38
		70
66	2
42
	47	38
	2
66		70
43
	70
	56	91
		62
	38	47
44
	47
	38
		66
	70
	1

17

Image 17

Weider 831.159821 user manual Wrap the Low Cable 47 around a 90mm Pulley

Contents

SEARS, Roebuck and CO. Hoffman ESTATES, IL Serial Number Decal under seat Table of Contents Important Precautions Left Side Using the weight systemBefore YOU Begin Frame Assembly AssemblyAssembly requires two people Make Things Easier for Yourself Side is on top Nylon LocknutSide shown Do not tighten the M10 Nylon Locknuts 70 yet Large Attach the Right Seat Frame 5 to the Right With two M10 x 85mm Bolts 60, two M10Do not tighten the M10 Nylon Locknuts Yet 65mm Bolts 63, four M10 Washers 75, Two M10 Nylon Locknuts Not tighten the Locknuts yet Shown Repeat this step with the Left Butterfly Arm ARM AssemblyButterfly Frame must be able to pivot easily Frame must be able to pivot easily Butterfly Arm Locate the High Cable 45. Route the Cable up Cable AssemblyAn M10 Nylon Locknut Groove of the Pulley Locate the Leg Press Cable 95.Attach An M8 Nylon LocknutIng Locate the Butterfly Cable M8 Nylon LocknutPage Attach a 90mm Pulley 38 inside the Right Leg Locate the Leg Lever Cable Pulley Ing Locate the Low Cable 47. Route the small ballLocknut Wrap the Low Cable 47 around a 90mm Pulley On the Upright M10 Nylon Locknut 70. Be sure the Cable TrapIs turned to hold the Cable in the groove of the Pulley Seat Assembly Screw 68. Do not fully tighten the Screw Frame 9. Attach the tether on the Pins to Attaching the Accessories to a Pulley Station AdjustmentsChanging the Weight Setting Converting the Butterfly Arms Tightening the Cables Adjusting the LEG Press PlatePulley move smoothly Move smoothly Lbs Left Top Weight Resistance ChartWeight High Press LEG Butter LOW Pulley ARM FLY ARM Lever Low Cable Cable Diagrams 46 47 3/7 96 95 1/2 95 148 1/4 47 276 3/4 45 116 3/4 Cable ID ChartLeg Press Cable Exercise Guidelines Staying Motivated Muscle ChartCooling Down Model No Full 90 DAY WarrantyIf parts become worn and need to SEARS, Roebuck and CO., Hoffman ESTATES, IL Check to see if it has been pre-assembled Part Identification CHART-Model No Page Save this Part LIST/EXPLODED Drawing for Future Reference Qty Description Key No. Qty Part LIST-Model No R0403A DRAWING-Model No