Weider 831.159821 Locate the Leg Lever Cable, Attach a 90mm Pulley 38 inside the Right Leg

33.Locate the Leg Lever Cable (96).	Route the
eyelet end of the Cable through the Right Leg

(73)and attach it to the Leg Lever (4) with an M10 x 25mm Shoulder Bolt (99) and an M10 Nylon Locknut (70).

34.Attach a 90mm Pulley (38) inside the Right Leg

(73)with an M10 x 70mm Bolt (81), two M10 Washers (75), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

35.Route the Leg Lever Cable (96) through the Right Upright (6) and around a 90mm Pulley (38). Attach the Pulley inside the Upright with an M10 x 70mm Bolt (81), two M10 Washers (75), two 13mm Spacers (34), and an M10 Nylon Locknut (70).

36.Wrap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley and a Cable Trap

(91)to the second set of holes from the bottom of the indicated Double “U”-Bracket (56) with an M10 x 50mm Bolt (62) and an M10 Nylon Locknut

(70).Be sure the Cable Trap is turned to hold the Cable in the groove of the Pulley.

15

33
4
70	73
96	99
34
70	73	38
75
	34
			75
	34
			81
35	70
			34
		75
	6		38
	96
			34
	75	81
36
	70		56
	91
			62
	38
	96