Assembly
Before beginning assembly, carefully read the following information and instructions:
Make Things Easier for Yourself! Everything in this manual is designed to ensure that the weight bench can be assembled suc- cessfully by anyone. However, it is important to recognize that the weight bench has many
small parts, and that the assembly process will take time. Most people find that by setting aside plenty of time, and by deciding to make the task enjoyable, assembly will go smoothly.
•For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
•As you assemble the weight bench, make sure all parts are oriented as shown in the drawings.
The following tools (not included) are required for assembly:
• Two (2) adjustable wrenches
• One (1) rubber mallet
• One (1) standard screwdriver
•Assembly requires two people.
•Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
•Tighten all parts as you assemble them, unless instructed to do otherwise.
• One (1) phillips screwdriver
•Lubricant, such as grease or petroleum jelly plus soapy water.
Assembly will be more convenient if you have the following tools: A socket set, a set of
1. Before assembling this product, make sure you |
have read and understand the information in the |
1
5
box above. |
Insert a 1 3/4” Slotted Square Inner Cap (50) into the |
Bench Frame (5). |
Place the Bench Frame (5) in the bracket (A) on the Front Leg (4) and attach it with three M8 x 16mm
Bolts (39) and three M8 Washers (21).Do not fully tighten the Bolts.
Note: The Caps mentioned in all assembly steps may come
39 21
21
4 | A | |
39 | ||
|
50
39
2.Press a 2” Square Inner Cap (29) into the lower end of the Left Upright (8).
Attach the Left Upright (8) to the Left Base (6) with a Support Plate (28), two M8 x 65mm Bolts (42) and
two M8 Nylon Locknuts (40). Do not confuse the
Left and Right Upright. Locate the welded nut to identify each Upright.
Do not tighten the Nylon Locknuts yet.
2
Welded Nut
8
42
28
40 
629
6
