Weider WEBE0635.1 user manual Locknuts yet, Tighten the M8 Nylon Locknuts 30 used in steps 1

2.Attach the Bench Frame (2) to the Center Frame

(3) with two M8 x 53mm Bolts (38), two M8 Washers (31), and two M8 Nylon Locknuts (30); and an M8 x 55mm Bolt (37) and another M8 Nylon Locknut (30). Do not tighten the

Locknuts yet.

3.Attach the Front Leg (1) to the Bench Frame (2) with three M8 x 15mm Screws (34) and three M8 Washers (31).

4.Set the Adjustment Tube (14) into a set of brack- ets on the Uprights (4, 5). Make sure that the pins on the Adjustment Tube are inserted into the holes in the brackets.

Tighten the M8 Nylon Locknuts (30) used in steps 1 and 2.

5.Attach the Weight Tube (8) to the Leg Lever (7) with an M8 x 45mm Bolt (33), two M8 Washers (31), the 4mm Spacer (29), and an M8 Nylon Locknut (30).

2
		37
			31	30
38
2			3
		38	30
3
34	31
34
			2
31
31		34
1
4
5
Pin	14
Hole			4
Pin
5
7
30
31			33
	29 31
8

6