11.Attach the Curl Pad (29) to the Curl Post (28) with two M6 x 16mm Screws (30).
Press the two Weight Adapter Bushings (16) into the Weight Adapter (15).
12.Press a Foot (51) onto the bottom of an Upright (45).
Slide an Upright Bushing (46) onto the bottom of the Left Weight Rest (47). Make sure the tabs are on the side shown. Attach a Weight Rest Bushing (54) inside the bottom of the Left Weight Rest with two M4 x 16mm Screws (71).
Press the tab on the Upright Bushing (46) into the indicated holes in the Left Weight Rest (47) Slide the Weight Rest and Upright Bushing into the Upright (45). Press the Upright Bushing into top of the Upright. Secure the Weight Rest with an Adjustment Knob (55).
Repeat this step with the other Upright (45) and Right Weight Rest (48).
13.Attach the Frame (43) to an Upright (45) with two Large Joint Plates (12), four M10 x 78mm Bolts (67), and four M10 Nylon Locknuts (11). Do not tighten the Locknuts yet.
Attach the Frame (43) to the other Upright (45) in the same manner. Make sure the decals applied to the Upright and Frame are in the indicated locations.
11 |
|
|
29 |
|
|
|
| 28 |
| 15 |
|
| 16 |
|
16 |
| 3 |
12 |
|
|
|
| 47 |
48 |
| 55 |
45 |
|
|
| Hole | 71 |
| 71 | |
| 45 | |
|
| |
| 46 |
|
| Tab |
|
| 54 | 51 |
13 |
|
|
Decal | 11 |
|
| 12 | Decal |
| 43 | |
45 |
| |
|
| |
| 12 |
|
|
| 45 |
| 67 |
|
8
