Weider WESY19740 user manual Locate the Low Cable 53. Route the Cable

18. Locate the Low Cable (53). Route the Cable	18
through the Leg Lever (8) and the Front Leg (7).
Attach a 90mm Pulley (48) inside of the Leg			8		48
Lever (8), over the Low Cable (53), with an M10 x		56	52
67mm Bolt (71), two M10 Washers (57), two
12mm Spacers (52), and an M10 Nylon Locknut		57			7
(56).
		53			57
					52
					71
19. Attach a 90mm Pulley (48) inside of the Front Leg	19
(7), over the Low Cable (53), with an M10 x
67mm Bolt (71), two M10 Washers (57), two		57
12mm Spacers (52), and an M10 Nylon Locknut					48
(56).				7
	56
		52			53
					57
					52
					71
20. Route the Low Cable (53) under a 90mm Pulley	20
(48) and through the Upright (3). Attach the Pulley
inside of the Upright with an M10 x 67mm Bolt	56	52
(71), two M10 Washers (57), two 12mm Spacers
(52), and an M10 Nylon Locknut (56).	57
					3
		48			57
	53
					52
					71
21. Route the Low Cable (53) over a 90mm Pulley	21
(48). Attach the Pulley and two Half Finger
Guards (43) to the Double “U”-Bracket (63) with	56
an M10 x 46mm Bolt (81) and an M10 Nylon
Locknut (56). Make sure the Finger Guards are			63
on the outside of the “U”-bracket as shown.	43
			48
	53
				43	81
	12