27.Wrap the Ab Cable (47) around a 3 1/2” Pulley (24). Insert the Ab Cable down through the Press Top Frame (9). Attach a 3/8” Flat Washer (48) and a 5/8” x 3/4” Bushing (66) to a 3/8” x 3 1/4” Bolt (62). Slide the Bolt through the Press Top Frame and the 3 1/2” Pulley. Secure another 5/8” x 3/4” Bushing and 3/8” Flat Washer to the Bolt with a 3/8” Nylon Locknut (50).
28.Remove the preassembled 3/8” x 2” Bolts (54) from the other Adjustable Pulley Plates (23).
Wrap the Ab Cable (47) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley and a Cable Trap (25) between the top holes in the Adjustable Pulley Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place.
29.Wrap the Ab Cable (47) around a 3 1/2” Pulley (24). Attach the 3 1/2” Pulley to the rear bracket on the Press Top Frame (9) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure the Ab Cable is routed in the direction shown.
Wrap the Ab Pulley (47) around another 3 1/2” Pulley (24). Attach the 3 1/2” Pulley to the forward bracket on the Press Top Frame (9) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).
30.Wrap the Ab Cable (47) around a 3 1/2” Pulley (24) and slide the Ab Cable through the hole in the Press Upright (2). Attach a 3/8” Flat Washer (48) and a 5/8” x 3/4” Bushing (66) to a 3/8” x 3 1/4” Bolt (62). Slide the Bolt through the Press Upright and the 3 1/2” Pulley. Secure another 5/8” x 3/4” Bushing and 3/8” Flat Washer to the Bolt with a 3/8” Nylon Locknut (50).
13
27 |
| 66 |
|
| |
| 24 |
|
62 |
| 48 |
|
| |
| 48 | 50 |
|
| |
47 |
|
|
| 9 |
|
28 |
|
|
| 47 |
|
| 25 |
|
| 54 |
|
|
| 24 |
| 23 | 50 |
|
| |
29 | Bracket |
|
9 |
|
|
| 54 | 24 |
| 54 | 82 |
| 24 | 50 |
|
| |
| 47 |
|
30 |
|
|
| 66 | |
| 2 | 24 |
|
| |
62 |
| 66 |
|
| |
| 48 |
|
| 48 |
|
47 | 50 | |
