31.Locate the Weight Cable (72). Note that one end of the Weight Cable has a bolt, and the other end has a ball on it.
Lay the Weight Cable (72) inside the bracket on the Butterfly Base (4) in the manner shown. Attach a
3 1/2” Pulley (24) to the bracket with a 3/8” x 2” Bolt
(54)and a 3/8” Nylon Locknut (50). Be sure the
Weight Cable is in the groove of the 3 1/2” Pulley.
32.Wrap the Weight Cable (72) around a 3 1/2” Pulley
(24).Attach a 3/8” Flat Washer (48) and a 5/8” x 3/4” Bushing (66) to a 3/8” x 3 1/4” Bolt (62). Slide the Bolt through the Butterfly Front Leg (3) and the 3 1/2” Pulley. Secure another 5/8” x 3/4” Bushing and 3/8” Flat Washer to the Bolt with a 3/8” Nylon Locknut (50).
33.Insert the Weight Cable (72) through the hole in the Leg Lever (41), up around a 3 1/2” Pulley (24), back through the hole in the Leg Lever, and through the upper hole in the Butterfly Front Leg (3).
Attach the 3 1/2” Pulley (24) and two 5/8” x 1/2” Bushings (93) to the Leg Lever (41) with a 3/8” x 2 3/4” Bolt (89), two 3/8” Flat Washers (48), and a 3/8” Nylon Locknut (50).
34.Lay the Weight Cable (72) under a 3 1/2” Pulley (24) as shown. Attach the 3 1/2” Pulley to the bracket on the Butterfly Base (4) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).
31 |
|
|
|
|
|
| 3 |
|
|
|
|
| 24 | 54 |
| 4 |
|
| 72 |
|
|
|
| |
|
| 50 |
|
|
|
| Bracket |
| |
32 |
| 3 |
|
|
|
|
|
| |
|
|
| 62 |
|
|
|
| 48 |
|
|
|
| 24 |
|
|
|
|
| 72 |
|
|
| 66 |
|
| 50 | 48 |
|
|
33 |
|
| 41 |
|
|
|
| 48 | 89 |
| 72 |
|
| |
| 3 | 24 |
| |
|
|
| ||
|
|
|
| |
| 48 |
| 93 |
|
50 |
|
|
| |
|
|
|
| |
34 |
|
|
|
|
| 72 |
|
|
|
|
| 24 | 54 |
|
4 |
|
|
|
|
|
| 50 | Bracket |
|
|
|
|
| |
14
