15.Slide a Pad Tube (50) into the Leg Lever (56). Slide two Large Foam Pads (52) onto the Pad Tube.
Attach the other two Pad Tubes (50) to the Leg Lever (56) and the Leg (5) in the same manner.
16.Insert the rod on the Backrest Frame (32) into the slot in the Seat Carriage (44). Hold the Backrest
Frame vertically over the Seat Carriage and slide the rod into the slot, as shown in the inset drawing.
17. Attach the Curl Pad (43) to the Curl Post (42) with two M6 x 16mm Screws (41).
18.Adjust the tension on the upper cable (not shown) as described in UPPER CABLE ADJUSTMENT on page 12.
19. Make sure that all parts have been properly tight- ened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on page 13.
Before using the resistance system, turn on the console and change the resistance setting as described in CONSOLE OPERATION on page 17.
15 |
|
| 5 |
56 | 50 |
| |
52 |
|
50 |
|
50 | 52 |
16 |
|
32 |
|
Rod |
|
Slot |
|
44 |
|
32 |
|
44 |
|
17 |
|
43 |
|
42 |
|
| 41 |
11
