![](/images/new-backgrounds/1147917/14791723x1.webp)
20. Wrap the Short Cable (9) around a 3 1/2Ó Pulley (35) | 20 |
|
|
|
in the direction shown. Attach the 3 1/2Ó Pulley (35) to |
| N |
| |
|
|
| ||
the front bracket (M) underneath the Top Frame (1) | 63 | M |
|
|
with a 3/8Ó x 2Ó Bolt (62) and a 3/8Ó Nylon Locknut | 62 |
|
|
|
(63). Make sure the Bolt (62) is inserted from the | 1 |
|
|
|
direction shown on the drawing. |
|
|
|
|
Wrap the Short Cable (9) around a 3 1/2Ó Pulley (35) |
|
| 63 | 62 |
in the direction shown. Attach the 3 1/2Ó Pulley (35) to |
|
|
|
|
the rear bracket (N) underneath the Top Frame (1) |
|
|
|
|
with a 3/8Ó x 2Ó Bolt (62) and a 3/8Ó Nylon Locknut |
|
|
|
|
(63). Make sure the Bolt (62) is inserted from the | 9 |
| 35 |
|
direction shown on the drawing. |
|
|
| |
|
|
|
| |
21. Make sure the Short Cable (9) is in the groove of | 21 |
|
|
|
all Pulleys and that the Cable and the Pulleys |
|
|
| |
|
|
|
| |
move smoothly. |
|
|
|
|
Attach the closed loop on the end of the Short Cable | 9 |
| 53 |
|
|
|
| ||
(9) to the Weight Tube (25) with the 5/16Ó x 1 3/4Ó |
|
| 25 |
|
Bolt (58) and a 5/16Ó Nylon Locknut (53). It will be |
|
|
| |
58 |
|
|
| |
necessary to lift the Weight Tube and the Top Weight |
|
|
| |
|
|
|
| |
to insert the Bolt through the Weight Tube and the |
|
|
|
|
loop on the Cable. |
|
|
|
|
22. Locate the Long cable (2). It is approximately 215Ó | 22 | 42 |
|
|
long. Wrap the end with the ball around a 3 1/2Ó |
|
| ||
|
|
|
| |
Pulley (35) in the direction shown. Attach the Pulley | 55 |
|
|
|
to the bracket (O) on the Base (8) with a 3/8Ó x 2Ó | 57 |
|
| |
Bolt (62) and a 3/8Ó Nylon Locknut (63). |
|
|
|
|
Thread the Long Cable (2) through the Press Frame | 66 |
|
|
|
|
|
| 35 | |
(12). Wrap the Long Cable around a 3 1/2Ó Pulley |
|
|
| |
|
|
|
| |
(35) in the direction shown. Attach the Pulley to the | 35 |
|
| 2 |
Front Upright (42) with a 3/8Ó x 3 1/2Ó Bolt (54), a | 54 | 12 |
|
|
Cable Trap (66), a 3/8Ó Flat Washer (55) and a 3/8Ó |
|
|
| |
Nylon Jamnut (57). |
| 8 | O | 63 |
|
|
| 62 |
|
23. Remove the free Pulley (35) attached to the Pulley | 23 |
|
|
|
Plates (31). Wrap the Long Cable (2) around the |
|
|
| |
|
| 31 |
| |
Pulley in the direction shown. |
|
|
| |
57 |
| 60 |
| |
|
|
| ||
with the 3/8Ó x 1 1/2Ó Bolt (60) and the 3/8Ó Nylon | 2 |
| 35 |
|
Jamnut (57). |
|
|
12