SEAT ASSEMBLY
26. Attach the Backrest (41) to the Front Upright | 26 |
|
|
(42) with two 1/4” x 2 1/2” Screws (43) and |
|
| |
|
|
| |
two 1/4” Flat Washers (10). |
|
|
|
|
|
| 42 |
|
|
| 41 |
| 43 10 |
|
|
27. Press a 1 1/2” Square Inner Cap (32) into the |
|
|
|
Seat Frame (36). |
|
|
|
Insert the 1/4” x 2” Carriage Bolt (38) into the | 27 |
|
|
|
|
| |
center hole in the Seat Plate (37). Attach the |
|
| 13 |
Seat Plate to the Seat (13) with two 1/4” x |
|
|
|
3/4” Screws (18). |
|
|
|
Insert the 1/4” x 2” Carriage Bolt (38) into the |
| 38 |
|
indicated hole in the Seat Frame (36). |
| 37 | 32 |
Tighten a 1/4” Nylon Locknut (2) with a 1/4” |
| ||
|
| ||
Flat Washer (10) onto the Carriage Bolt. |
|
| 18 |
|
|
| |
| 36 |
|
|
Attach the other end of the Seat (13) to the | 24 | 10 |
|
Seat Frame (36) with a 1/4” Flat Washer (10) |
| 2 | |
|
| ||
and the 1/4” x 2” Screw (24). |
|
| |
|
|
| |
28. Press a 1 1/2” Square Inner Cap (32) into the | 28 |
|
|
Leg Lever (29). |
| 36 | |
|
| ||
Lubricate the 5/16” x 2 1/4” Bolt (33). Attach |
|
|
|
the Leg Lever (29) to the Seat Frame (36) |
|
| 3 |
with the 5/16” x 2 1/4” Bolt and a 5/16” Nylon | 2 |
| |
|
| ||
Locknut (3). Do not overtighten the Nylon |
| ||
Locknut. The Leg Lever must be able to |
| ||
|
|
| |
pivot freely. |
|
| 29 |
|
| 35 | |
Insert the 3/8” x 2” Eyebolt (35) into the Leg |
|
| |
|
| 9 | |
Lever (29) from the direction shown. Tighten |
|
| |
|
| 21 | |
a 3/8” Nylon Locknut (21) with a 3/8” Flat |
|
| 32 |
Washer (9) onto the Eyebolt. |
|
| |
|
|
| |
14
