CABLE ASSEMBLY
32.Wrap the Military Press Cable (72) around a
3 1/2” Pulley (15). Attach the Pulley to the Top Frame (55) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21).
See the inset drawing. Wrap the Long Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the bracket on the Stabilizer (5) with a 3/8” x 2” Bolt (12) and a 3/8” Nylon Locknut (21). Be sure that the Cable Trap is turned to hold the Cable in place.
33.Wrap the Military Press Cable (72) around a 3 1/2” Pulley (15). Attach the Pulley and a Cable Trap (66) to the Pivot Arm (101) with the 3/8” x 3 3/4” Bolt (88), a 3/8” Flat Washer (9), and a 3/8” Nylon Locknut (21). Be sure that the Nylon Locknut is on the side shown and that the Cable Trap is posi- tioned to hold the Cable in place.
16
32 |
|
|
| 55 |
|
15 |
|
|
21 | 12 |
|
|
| |
| 72 |
|
|
| 72 |
|
| 12 |
|
| Bracket |
|
| 66 |
|
| 15 |
|
| 21 |
|
| 5 |
33 |
|
|
| 15 |
|
88 | 66 |
|
|
| |
| 101 | 9 |
|
| |
| 72 | 21 |
