Weil-McLain 88 Water and steam boilers — Series 2 —

Install jacket (continued)

Install jacket front and back panels

1.Slide the jacket front and back panels down over the top channels and into the bottom channels as shown in Figure 30.

2.Slide the upper and lower channels as needed to square up the fit.

Install jacket side panels

1.Remove jacket side panels from cartons.

2.Before installing side panels, square up the jacket support rails.

•Place any of the jacket side panels on the rails as shown in Figure 30.

•Butt the side panel against the jacket corner panel.

•Push/pull on the upper and lower channels until the fit-up of the side panel, corner panel and channels is square.

•Place a jacket top panel in position against the jacket front panel to ensure the top alignment is square. Adjust the jacket support rails forward or backward if needed for square alignment.

•Tighten the 5/8-inch nuts on the upper (and lower) support brackets.

•Tighten the screws securing the upper and lower rails to the support brackets.

•Tighten the screws securing the front and back panels to the rails.

3.Apply all jacket side panels in the order shown in Figure 32.

•Remove jacket knockouts as required for tankless heaters and tankless heater openings.

•Note that panel sequence is not important for boilers not equipped with tankless heater intermediate sections.

Install jacket top panels

for Gas, Light Oil, & Gas/Light Oil-Fired Burners

Figure 30 Installing (removing) jacket front, rear and side panels

1.Place jacket top panels as shown in Figure 33, page 24.

•Remove knockouts for riser pipes and air bleed piping (front section) using tin snips.

Install jacket trim

2.Press jacket trim down over the front and side jacket panels as shown in Figure 31.

Figure 31 Press jacket trim down over jacket front, rear and side panels

22

Part No. 550-100-068/0308

Page 21 Page 23
Page 22
Image 22
Weil-McLain 88 manual Install jacket front and back panels, Install jacket side panels, Install jacket top panels
Page 21 Page 23

88 specifications

The Weil-McLain 88 series is a commercial cast iron boiler recognized for its durability, efficiency, and versatile design, making it a preferred choice for various heating applications. Designed primarily for commercial and industrial use, the Weil-McLain 88 combines advanced technology with proven engineering principles to deliver reliable performance and long-lasting service.

One of the standout features of the Weil-McLain 88 is its cast iron construction. Cast iron is renowned for its ability to retain heat, resulting in lower fuel consumption and more consistent heating. This robust material ensures that the boiler can withstand high temperatures and pressures, making it suitable for heavy-duty applications. The sectional design of the boiler allows for easy installation and maintenance, enabling quick access to components and minimizing downtime.

In terms of efficiency, the Weil-McLain 88 is designed to achieve high thermal efficiency ratings. The boiler employs a flue gas recirculation system, which significantly reduces heat loss and maximizes energy utilization. Additionally, its low water content provides rapid heating response times, ensuring that spaces are heated promptly, even during peak demand periods.

Another noteworthy characteristic of the Weil-McLain 88 is its versatility. The boiler can be configured for a variety of applications, including hot water heating, hydronic heating systems, and steam heating. It is compatible with multiple fuel types, including natural gas, propane, and various oil options, allowing for flexibility in fuel choice based on availability and pricing.

The Weil-McLain 88 also incorporates advanced control technologies that enhance operational efficiency. The integrated electronic controls feature diagnostic capabilities to streamline troubleshooting and maintenance, ensuring optimal performance throughout the boiler’s lifespan. Moreover, the boiler's design is compatible with modern building management systems, allowing for seamless integration into existing heating setups.

Overall, the Weil-McLain 88 series stands out for its combination of quality construction, efficient operation, and adaptability to different heating needs. Whether for a commercial building, industrial facility, or institutional application, the Weil-McLain 88 provides a reliable and efficient heating solution that meets the demands of the modern world.
Top Page Image Contents