CLEANING INSTRUCTIONS
CAUTION:
Electric Shock
Hazard
Do not submerge or immerse dispenser in water.
CAUTION:
Burn Hazard
This procedure requires the use of very hot water. Wear protective gloves while cleaning the warmer. Very hot water can cause burns.
IMPORTANT:
DO NOT use steel wool, sharp objects, or caustic, abrasive or chlorinated cleansers to clean the dispenser.
PROCEDURE: Clean Heated Dispenser
PRECAUTIONS: Disconnect dispenser from electric power. Drain product and allow dispenser to cool.
FREQUENCY: | Daily or after draining product from |
| dispenser |
TOOLS: | Mild Detergent, Clean Soft Cloth or Sponge |
| Long Handle Bristle Brush |
1.Disconnect warmer from electric power.
Drain product and allow warmer to cool before cleaning.
2. Fill warmer with very hot water.
3.Place an appropriate container under the faucet. Use a long handle bristle brush to stir the water while draining the hot water from the warmer.
4.Wipe the warmer inside and out with a soft cloth or sponge dampened with water and mild detergent.
5.Rinse the warmer inside and out with a soft cloth or sponge dampened with clean water.
6.Wipe the tank cover with a soft cloth or sponge dampened with water and mild detergent. Rinse with clean water.
7.If necessary, clean the faucet and drip tray (see page 8).
8.Allow all components to air dry, then reassemble.
Procedure is complete
595 p/n 75982 OpM Heated Dispenser
6
