CAUTION:
ELECTRIC SHOCK
HAZARD
Disconnect appliance from electric power before cleaning.
CAUTION:
HOT SURFACE
Exposed surfaces can be hot to the touch and may cause burns. Allow appliance to cool before cleaning.
IMPORTANT: DO NOT spill or pour water into controls, control panel or wiring.
DO NOT submerge drawer frames in water. Water damage is not covered by warranty.
IMPORTANT: DO NOT use steel wool or abrasive cleansers to clean the warmer, drawers or drawer rollers.
PRECAUTIONS: | Disconnect appliance from electric power. |
| Allow unit to cool before proceeding. |
FREQUENCY: | Minimum |
TOOLS: | Mild Detergent |
| Clean cloth or sponge |
|
|
|
|
1.Disconnect warmer from electric power. Allow to cool before cleaning.
2.Remove product pans from drawers. Remove drawers from warmer.
3.Place a suitable container under drain, remove drain cap and drain water pan. Discard drain water. Remove water pan (see page 6) and drip tray.
4.Clean drawers, product pans, water pan and drip tray by wiping with a soft cloth dampened with water and mild detergent.
Rinse all components thoroughly with a soft cloth dampened with clear water.
Dry all components prior to reinstalling them in warmer.
5.Sweep crumbs and other debris from warmer cavity.
6.Clean the outside of the unit by wiping with a clean cloth or sponge dampened with warm water and mild detergent. Dry with a clean cloth, then wipe with a polish formulated for stainless steel.
7.It is important to keep the slide rails clear and free from debris. Periodic cleaning of the slide rails and other adjoining parts is necessary to assure smooth drawer operation.
8.Check drawer rollers. Be sure they roll freely are free from debris.
9.Reinstall water pan (see page 6) drip tray, drawers and product pans. Reinstall drain cap on water pan and add water to water pan to 1/2" from top.
Procedure is complete
10
