NORMAL OPERATION
Plug unit into an appropriate electrical receptacle.
Add water to water pan. Proper water level is 1/2" from top.
OPERATIONAL TIPS:
Refill water pan as required during operation.
Use filtered or treated water to minimize mineral/scale
Press power switch to ON. Allow unit to
Press the MENU key to display parameters (AIR temperature, WATER temperature or TIME setting) for the current menu.
Select parameter (AIR temperature, WATER temperature or TIME) to be displayed by pressing SEL key. The corresponding indicator will glow. Display will default to AIR temperature if no key is pressed for 5 seconds.
Change menu by pressing the MENU key at the same time as the UP ARROW or DOWN ARROW key. Any one of a maximum of eight menus may be displayed.
NOTE: Settings for AIR temperature, WATER temperature and TIME may only be changed in the program mode. Normal setting information is shown on the control panel chart.
TEMPERATURE AND HUMIDITY SETTINGS
| HIGH HEAT |
| MEDIUM HEAT |
| LOW HEAT |
| ||||
|
|
|
|
|
|
|
|
|
|
|
AIR | WATER |
| MOISTURE | AIR | WATER | MOISTURE | AIR | WATER |
| MOIS- |
ºF (ºC) | ºF (ºC) |
|
| ºF (ºC) | ºF (ºC) |
| ºF (ºC) | ºF (ºC) |
| TURE |
190 (88) | 190 (88) |
| HIGH | 160 (71) | 160 (71) | HIGH | 140 (60) | 140 (60) |
| HIGH |
|
|
|
|
|
|
|
|
|
|
|
190 (88) | 160 (71) |
| MEDIUM | 160 (71) | 145 (63) | MEDIUM | 140 (60) | 135 (57) |
| MEDIUM |
|
|
|
|
|
|
|
|
|
|
|
190 (88) | 130 (54) |
| LOW | 160 (71) | 130 (54) | LOW | 140 (60) | 130 (54) |
| LOW |
|
|
|
|
|
|
|
|
|
|
|
CAUTION:
HOT SURFACE
Exposed surfaces can be hot to the touch and may cause burns.
CAUTION:
ELECTRICAL
SHOCK HAZARD
DO NOT splash or pour water onto control panel or wiring.
The controller incorporates a single TIME setting.
Press MENU key, then START/STOP key to start timer. An audible alarm will sound at the end of the time period.
Time is factory set at 2hr. Time setting can be changed in program mode.
Timer can be set from 0:00 to a maximum of 6:00.
7
