Wells HDW-2 INSTALLATION continued, Electrical Shock Hazard, Electric Shock Hazard

ELECTRICAL

Refer to electrical specifications on page 1. Circuit must meet or exceed the amperage and wattage requirements listed.

120 Volt units require a properly grounded NEMA 5-15R receptacle:

208/240 Volt units require a properly grounded NEMA 6-15R receptacle:

INSTALLATION (continued)

WARNING:

ELECTRIC

SHOCK HAZARD

All servicing requiring access to non-insulated elec- trical components must be performed by a factory au- thorized technician.

DO NOT open any access panel which requires the use of tools. Failure to

follow this warning can result in severe electrical shock.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

CAUTION:

ELECTRICAL

SHOCK HAZARD

The ground prong of the power cord is part of a system designed to protect you from electric shock in the event of internal damage. DO NOT cut off the large round ground prong, or twist a blade to fit an existing receptacle.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the appliance.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

5