![](/images/new-backgrounds/1289813/28981311x1.webp)
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with
Assembly requires the included hex keys | and your own Phillips screwdriver | , adjustable | |
wrench | , and needlenose pliers | . |
|
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been
M5 Star | M5 x 16mm | M4.2 x 18mm | M4.2 x 19mm | M8 x 15mm |
Washer | Screw | Screw | Screw | |
|
|
|
| Bolt |
M8 Star | M10 Nut | M10 x 58mm Bolt |
Washer |
M10 Star | 1/4" Flat Washer | 1/4" x 3 1/2" Bolt |
Washer |
|
6