18
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Unplug the power cord. CAUTION: You must be able to
safely lift 45 lbs. (20 kg) to raise, lower, or move the
treadmill.
1. Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the pos-
sibility of injury, do not lift the frame by the plastic
foot rails. Make sure to bend your legs and keep your
back straight. As you raise the frame, make sure to lift
with your legs rather than your back. Raise the frame
about halfway to the vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob
to the left and hold it. Raise the frame until the hole in the
latch plate is aligned with the latch pin. Slowly release the
latch knob; make sure that the latch pin is fully in-
serted into the latch plate.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85° F (30° C).
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the latch
pin is fully inserted into the latch plate.
1. Hold the handrails and place one foot against a wheel.
2. Tiltthe treadmill back until it rollsfreely on the wheels.
Carefullymove the treadmill to the desired location. Never
move the treadmillwithout tipping it back. To reduce
the risk of injury, use extreme cautionwhile moving
the treadmill.Do not attempt to move the treadmill
over an unevensurface.
3. Place one foot against one of the wheels, and carefully
lower the treadmill until it is in the storage position.
1
Frame
Handrail
Wheel
Latch Pin
Latch Knob
Latch
Plate
2