3.With the help of a second person, raise the Uprights (53, 54) so the Base (52) is flat on the floor as shown. Next, position the front of the treadmill Frame (51) between the Uprights.

See the inset drawing. Locate the wire inside of the lower end of the Right Upright (54). Secure the wire to the Wire Harness (98) using the included plastic tie. Then, pull the upper end of the wire until the end of the Wire Harness is extending from the indicated hole in the upper end of the Right Upright.

Have a second person lift and hold the front end of the Frame (51). Hold a Frame Spacer (111) between the Right Upright (54) and the Frame. Attach the Right Upright and the Frame Spacer to the Frame with a Frame Bolt (1), a Frame Washer (14), and a Frame Star Washer (9).

Repeat this step on the left side of the treadmill.

4.Turn the Console Assembly (91) face-down. Be careful not to scratch the face of the Console Assembly.

Identify the Right Handrail (55), which has a large hole in one side.

Attach the Right Handrail (55) to the Console Assembly (91) with two Console Screws (4), a Crossbar Screw (5), and a Crossbar Star Washer (12).

3

Hole

 

 

 

53

 

 

 

54

 

 

 

111

Large

98

 

Hole

 

14

 

 

 

52

9

 

1

51

Wire

 

 

 

 

Tie

 

 

98

54

4

 

 

 

5

 

 

12

 

 

4

 

 

Large Hole

55

 

 

 

91

 

7

Page 7
Image 7
Weslo WATL13906.0 user manual