5. Set the Console (80) on the Console Plate (81), | 5 |
|
|
and insert the excess wire into the Handrail | 80 |
| |
Crossbar (83). Make sure that no wires are |
|
| |
pinched. |
|
|
|
Attach the Console (80) with four M4.2 x 12mm |
|
| 81 |
Screws (3); start all four Screws before tight- |
| 83 | |
ening any of them. |
|
| |
|
|
| 3 |
6. Attach the console back to the Console (80) with | 6 |
|
|
the four M4.2 x 12mm Screws (3) that you re- | 80 |
| |
moved in step 4. |
|
| |
See step 1. Tighten the two M8 x 16mm Bolts |
|
|
|
(1) on each side of the treadmill. |
|
|
|
See step 2. Tighten the M6 x 10mm Bolt (2) on |
|
|
|
each side of the treadmill. |
|
|
|
|
| Console Back | 3 |
|
|
| 3 |
7. Tighten a M4.2 x 12mm Hood Screw (30) into | 7 |
|
|
the Motor Hood (53). |
|
| |
|
|
| 53 |
|
|
| 30 |
| 9 |
|
|
