Weslo WETL20708.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-
cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-
rate the walking belt and cause excessive wear.	1
HOW TO PLUG IN THE POWER CORD		Socket on Treadmill
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This product is equipped		Power
with a power cord having an equipment-earthing conductor and an
earthing plug. IMPORTANT: If the power cord is damaged, it		Cord
must be replaced with a manufacturer-recommended power
cord.	2	Adapter
See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill.	Screw	Cover
See drawing 2. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the		Pins
power cord and tighten the screw in the adapter. IMPORTANT:	Adapter
Make sure that the adapter cover is secure and that the screw		Metal
has been tightened before using the power cord.		Clips
See drawing 3. Plug the power cord into an appropriate outlet that is	3	Outlet
properly installed and earthed in accordance with all local codes and
ordinances. IMPORTANT: The treadmill is not compatible with
RCD-equipped outlets.

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

11