.
.
.
While a second person holds the Console (6) near
the Console Bracket (45), connect the Extension Wire
(62) to the console wire. Make sure the slack
Resistance Cable (26) is pulled out of the Upright (3).
Attach the Console (6) to the Console Bracket (45)
with four M4x 16mm Screws (16). Push the
Resistance Control Knob (50)onto the Resistance
Control (26).
Make sure that there are two Pivot Bushings (56) in
each Handlebar (8) and inthe Upright (3).
Tap a 5/8"Axle Cap onto one end of the Pivot Axle
(2). Apply a thinfilm ofthe included grease tothe
Pivot Axle.
Insert the PivotAxle (2)through one of the Handlebars
(8) and the Upright (3).
Slide the other Handlebar (8) onto the Pivot Axle (2).
Secure the Handlebars tothe Upright (3) by tapping a
5/8" Axle Cap (57) onto the end of the Pivot Axle.
Console
Wire //,
16
2
56
57
57