Weslo WLEX14820 user manual Wires, Inserting, Upright

6.While another person holds the Upright (13) in the position shown, connect the console wire to the Reed Switch Wire (43). Next, connect the Resistance Cable

(19) to the Lower Cable (45) in the following way:

•See drawing A. Pull up on the metal bracket on the Lower Cable (45), and insert the tip of the Resistance Cable (19) into the wire clip inside the metal bracket as shown.

•See drawing B. Firmly pull up the Resistance Cable (19) and slide it into the top of the metal bracket as shown.

•See drawing C. Using pliers, squeeze the prongs on the upper end of the metal bracket together.

Push the excess Cable (19, 45) and the excess console wire down into the Frame (1), and insert the Upright into the Frame. Be careful to avoid pinching the Wires and Cables. Attach the Upright to the Frame with three M8 x 15mm Button Screws (34) and three M8 Split Washers (42).

7.Attach the Seat (12) to the Seat Post (5) with four M8 Split Washers (42) and four M8 Nylon Locknuts (10). Note: The Split Washers and Nylon Locknuts may be preattached to the underside of the Seat.

6
			Be careful to
			avoid pinching
			the wires and
			cables while
			inserting the
				Upright.
		13
	19	Console Wire
		43
	45
	42	42		34
	34	1
A	B			C
	Metal			Metal
	Bracket		19
				Bracket
19
	45		45
7				12
				5
	42
	10			42
				10

6