Weslo WLTL29010 Assembly, requires a phillips screwdriver, ========, an adjustable wrench

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dis- pose of the packing materials until assembly is completed. In addition to the included allen wrench, assembly

requires a phillips screwdriver, (_========_ an adjustable wrench _-__ and scissors _.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor- mal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

	Handrail Bolt (1)-4	D	Console Screw	(3)-4
Handrail Washer (80)-4
		Extension Leg	Handrail	Star
Latch Screw (14)-2	Weight Rack Screw (13)-12	Screw (39)-2	Washer	(2)-4

1.With the help of a second person, raise the Uprights (38) to the position shown. During this step 1 and step 2, be careful not to pull on or damage the Wire Harness

(53)in the right Handrail (4).

Insert one of the Base Legs (44) into the right Upright (38), with the Base Leg Pad (33) in the indicated posi- tion. Using the included Allen Wrench (81), attach the Base Leg with a Base Leg Screw (39). Attach the other Base Leg (not shown) to the left Upright in the same way. Note: A replacement Base Leg Pad (33) may be included. If a Base Leg Pad becomes worn and needs to be replaced, use the replacement Base Leg Pad.

2.Hold a Handrail (4) against the left Upright (38) as shown. Thread two Handrail Bolts (1), with two Handrail Washers (80) and two Handrail Star Washers (2), into the left Upright and the Left Handrail. Do not tighten the Handrail Bolts yet.

Hold the other Handrail (4) close to right Upright and insert as much Wire Harness (53) as possible into the

81

33

53

Upright. Attach the right Handrail (4) to the right Upright

38

(38)with two Handrail Bolts (1), two Handrail Washers (80), and two Handrail Star Washers (2). Do not tighten the Handrail Bolts yet. Be careful not to pinch the Wire Harness (53). Remove the tie from the Wire Harness and the right Handrail.