West Bend QUIKSERVE instruction manual Using Your Coffeemaker - Controls And Features

USING YOUR COFFEEMAKER – CONTROLS AND FEATURES

There are five push buttons: PROG/AUTO, ON/OFF, HOUR, MIN, and AROMA

There are two indicator lights: PROG/AUTO and ON/OFF

The LCD display has six indicator icons plus the CLOCK display: AM, PM, BREW, AROMA, AUTO, and CLEAN

Programming Function: Depending on the model of coffeemaker there are up to three functions, which are user programmable.

1.Drip Coffee Auto-Brew Start Time Setting

2.Keep Warm Hours Setting – 1 to 5 hours (Glass carafe version only)

3.24hr Clock Setting

Note: There are two basic models available; Glass carafe model or Thermal carafe model. The Glass carafe model includes a programmable keep warm time. The Thermal carafe model turns off immediately after completion of the brew cycle, as there is no need for the keep warm function with the thermal carafe.

SELECTING FUNCTION TO PROGRAM

To enter the programming mode: Press and hold the PROG/AUTO button for 3- seconds. The PROG/AUTO indicator light will be flashing to indicate you are in programming mode. Each press of the PROG/AUTO button will alternatively select between programming the Drip Coffee Auto-Brew Time setting function, the Keep Warm Hours setting function (if applicable), the 24hr Clock setting function or exit the programming function. You can repeat the cycle on subsequent 3-second pressing of the PROG/AUTO button.

Note: While in programming mode, the PROG/AUTO indicator light will be flashing. In the event of a delay of 10 seconds between any button, the control will automatically exit the programming function retaining the last displayed values and the PROG/AUTO indicator light will go off.

PROGRAMMING THE DRIP COFFEE AUTO-BREW TIME SETTING FUNCTION

Press and hold the PROG/AUTO button for 3-seconds to select the Drip Coffee Auto-Brew Time setting function. The PROG/AUTO indicator light, the Auto LCD icon and the CLOCK display will all be flashing. Note: The default value in the CLOCK display will be the last programmed Drip Coffee Auto-Brew Time setting. If the desired time is displayed, press PROG/AUTO to confirm and set or each pressing of the HOUR or MINUTE button will adjust the time setting (and alternate between the display of AM or PM at each passing of 12:00). Note: Ensure the desired AM or PM LCD is displayed. If the alternate is displayed, continue to press the HOUR button until the desired hour and AM or PM LCD icon is displayed.

Pressing the PROG/AUTO button will confirm and set the displayed Auto-Brew time including AM or PM setting. The PROG/AUTO indicator light and the 1-digit keep warm hour will be flashing (second digit from the left in CLOCK display). Note: The default value will be the last programmed Keep Warm Hours setting; 1, 2, 3, 4, or 5 hours.

6