West Bend QUIKSERVE instruction manual

PROGRAMMING THE KEEP WARM HOURS SETTING FUNCTION

(GLASS CARAFE VERSION ONLY)

Use PROG/AUTO button to select the Keep Warm Hours setting function. The PROG/AUTO indicator light and the last set (programmed) 1-digit Keep Warm Hour LCD will be flashing. Note: The default value will be the last programmed Keep Warm Hours setting. If the displayed value is desired, press PROG/AUTO to confirm and set or pressing the HOUR button will adjust the keep warm hour setting from 1 to 5 hours. Each pressing of the HOUR button will increase the keep warm time by one hour. After the 5 hours maximum setting, the keep warm time will cycle back to 1hour.

Pressing the PROG/AUTO button will confirm and set the keep warm hour setting displayed. The PROG/AUTO indicator light and the CLOCK display will be flashing. Note: The default value displayed will be the last time of day displayed.

PROGRAMMING THE 24HR CLOCK SETTING FUNCTION

Use PROG/AUTO button to select the 24hr Clock setting function. The PROG/AUTO indicator light and the CLOCK display will be flashing. Note: The default value in the display will be the last time of day displayed. If the displayed time including AM or PM is desired, press PROG/AUTO to confirm and set or each pressing of the HOUR or MINUTE button will adjust the time setting (and alternate between the display of AM or PM at each passing of 12:00). Note: Ensure the desired AM or PM LCD is displayed. If the alternate is displayed, continue to press the HOUR button until the desired hour and AM or PM LCD icon is displayed.

Pressing the PROG/AUTO button will confirm and set the displayed clock setting. The time of day including AM or PM will be displayed with the colon (:), between hours and minutes, flashing to indicate the control is no longer in programming function; the PROG/AUTO indicator light will go out as well as all other indicator lights except the CLOCK.

MANUAL BREW

Pressing ON/OFF button immediately starts the brew cycle. The ON/OFF indicator will illuminate and the Brew LCD icon will be on to indicate the brewing cycle. Note: If Auto-Brew was set, manual brewing by selection of the ON/OFF button automatically cancels the Auto-Brew and the Auto LCD icon goes off. Note: The brew cycle will not initiate if the carafe is not in place (see Brew Stop Feature).

When the brew cycle is complete and the coffeemaker begins the keep warm function (if applicable), the Brew LCD icon will be off indicating the brew cycle is complete and the ON/OFF indicator light will remain on. The coffeemaker will continue the keep warm cycle until the programmed keep warm time has elapsed. When the programmed keep warm time has elapsed the coffeemaker will turn off. Pressing the ON/OFF button when the coffeemaker is already on immediately cancels the brewing or keep warm cycle and turns the coffeemaker off.

7