OPERATION
Operation
Use and Care (assembly)
To use your Coffee SolutionTM , begin by assembling the unit.
Lid
Water Reservoir
Delay Brew Lever
Ca
Warming Plate
One
Disp
Cord Storage
1.Place unit on a clean, fl at surface and plug into outlet.
2.For best possible taste, clean carafe and water reservoir before use. See page 9.
3.To program clock and timer, see Other Features on page 8.
4.Remove carafe from unit and fi ll with desired amount of cold water. Follow easy measuring marks to ensure correct amount of water. Open lid and pour water into water reservoir. NOTE: The amount of brewed coffee will always be less than the amount of water placed into water reservoir; coffee grounds and the fi lter will absorb 10%.
5.With the lid still open, remove the fi lter basket. Place fi lter in the fi lter basket. (Use quality disposable fi lters or use reusable fi lter provided.) Measure one tablespoon (level) of drip or regular ground coffee for each cup of coffee desired and place in fi lter. Be careful not to get any grounds inside the unit.
6.Return fi lter basket with choice of fi lter to the unit and close lid. Do not open lid during brewing cycle; leaving the lid down will preserve the coffee’s fl avor and heat.
6
