Mounting the Charger

You can mount the charger on any flat surface.

1) Use the two holes at the base of the charger as a template to mark the drill

holes.

2) Using a 1/8-inch (or 3 mm) drill bit, drill two holes 1/2 inch (13mm) deep.

3) Use the provided screws to attach the charger to the surface.

Charging the Battery

Your radio includes a charger and a rechargeable battery pack. Place your radio in the charger with the display facing forward. Make sure that the CHARGE LED on the charger turns orange.

Cautions:

ŠŠUse only the battery and charger supplied with this radio. Using a different charger or battery can damage the radio and create a risk of fire or shock.

ŠŠThe charger is not waterproof. If the charger falls into the water, unplug it before attempting to remove it from the water. After you remove the charger from the water, please contact West Marine directly (see back cover for contact information).

ŠŠWipe off dirt or shake water from your radio before placing in the charger if your radio gets dirty or wet.

E-18

West Marine VHF160 Radio Owner’s Manual

Page 22
Image 22
West Marine 14078562 manual Mounting the Charger, Charging the Battery