Using Your Radio

Turning It On

Press and hold POWER for at least two seconds to turn the radio on. Press and hold POWER again to turn the unit off.

Setting It Up

Even though you can change your radio’s settings at any time, you will probably want to establish initial settings after you have turned it on for the first time. You will adjust some of these settings on an as-needed basis, but some settings might only need to be set once.

Changing the volume

To change the speaker volume, press VOL/SQ to enter

Volume Setting mode. O (for volume level 0 - 9) displays. Press CHANNEL UP or CHANNEL DOWN to increase or decrease the volume levels. Press VOL/SQ to save.

Setting the Squelch level

The VHF160 recognizes signals as transmissions if they exceed a signal strength threshold.

Strong signals

Weak signals

 

 

Noise

 

 

No

Medium

High

Squelch

Squelch

Squelch

E-20

West Marine VHF160 Radio Owner’s Manual

Page 24
Image 24
West Marine 14078562 manual Using Your Radio, Turning It On, Setting It Up, Changing the volume, Setting the Squelch level