ADVANCED SETTINGS
57
MY NET N900 CENTRAL
USER MANUAL
Registration Screen
Purpose: Register your router if you have not already done so. Registering enables WD to notify
you of updates to the firmware and send you important information.
Log Screen
Purpose: Display and save logs generated by the router.
Log Level From the drop-down list, select the alert level of the log you want to
generate. Options are Debug, Notice, and Warning.
Log Table Click the tabs to reveal the log pages to view, clear, or refresh the
table.
Log Type From the drop-down list, select the type of log you want to
generate. Options are System, Attack, and Drop. The default is
System.
Save Log File to Local Hard
Drive
Click Save to copy the contents of the system log to a file on your
computer.
Language Screen
Purpose: The language is normally auto-detected based on your web browser settings. If the
selected language is not the language you desire, you can manually choose another language.
Select language From the drop-down list, select the language in which you want the
user interface to display.
Device Mode Screen
Purpose: Configure your router to operate in either router mode or AP (access point) mode. When
the router is used as an access point, it disables certain services, such as DHCP and routing, to
turn the router into a Wi-Fi access point, allowing you to expand your existing wireless networ k
without replacing your router.
For information about changing to AP mode, see “Using the Router as an Access Point” on page
71.