Western Telematic IPS-800-D20, IPS-800E-D20, IPS-1600-D20, IPS-1600E-D20 manual Text Interface

Quick Start

Figure 3.1: Plug Status Screen - Web Browser Interface (Model IPS-800-D20 Shown)

Internet Power Switch v1.41h			Site ID: (undefined)
Plug Name		Password		Status Boot/Seq. Delay					Default
-----+------------------		+-------------		+--------	ON	+-----------------	0.5	Secs	+---------	ON	+
1	(undefined)	(undefined)
2	(undefined)	(undefined)			ON		0.5	Secs		ON
3	(undefined)	(undefined)			ON		0.5	Secs		ON
4	(undefined)	(undefined)			ON		0.5	Secs		ON
5	(undefined)	(undefined)			ON		0.5	Secs		ON
6	(undefined)	(undefined)			ON		0.5	Secs		ON
7	(undefined)	(undefined)			ON		0.5	Secs		ON
8	(undefined)	(undefined)			ON		0.5	Secs		ON
-----+------------------		+-------------		+--------		+-----------------			+---------		+

“/H” for help. IPS>

Figure 3.2: Plug Status Screen - Text Interface (Model IPS-800-D20 Shown)

b)Text Interface:

i.Via Telnet: Telnet to the IPS’s default IP address (192.168.168.168). The Plug Status Screen (Figure 3.2) should be displayed.

ii.Via Local PC: Start your communications program (e.g., Hyperterminal) and then press [Enter]. The Plug Status Screen should be displayed as shown in Figure 3.2. The default communications parameters for the Console Port are 9600 bps, No Parity, 8 data bits, One stop bit.

3-3