Westinghouse CW39T8RW user manual Picture menu, Picture Settings Press

OSD Menu

OSD Menu

1. Picture menu

Description

Picture Settings: Press	button to enter the Picture Settings menu.
	Picture mode: Select between Dynamic, Standard,
	Movie and User.
	You may select the picture mode directly by pressing
	the PICTURE button on the remote control.

Note: when select the "Standard", the machine is in energy-saving status.

Brightness: Adjust brightness of the picture.

Contrast: Control the difference between the bright and

dark regions of the screen picture. Color: Adjust color of the picture.

Tint: Control the fresh tones to make them appear natural.

Sharpness: Set the amount of fine detail in the picture.

Screen Size: Select the displaying mode of the picture between Wide, Cinema, Zoom, Normal, Just Scan, Standard, Fill, and Over scan.

PC Settings: If the video input signal comes from your PC, you may adjust the Vertical Position, Horizontal Position, Clock, Phase or even perform an Auto adjustment.

Auto Adjust: Press OK button to setup the parameter of the screen automatically.

Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.

H/V Position: Adjust the transverse/vertical position of the screen.

Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained. Reset: Press OK button to reset the settings.

Color Temp.: Select between Normal, Cool and Warm.

13