EXTERNAL DEVICE CONNECTIONS

A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys.

B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel

keys.

RF switch (not supplied)

English

 

A

OUT

IN

 

B

Cable TV converter/descrambler (Not supplied)

Two-set

 

signal

Cable TV line

splitter

(Not

 

supplied)

 

EXTERNAL DEVICE CONNECTIONS

IMPORTANT:

Turn off the LCD TV first before connecting an external device to prevent any possible damage or physical injury.

For more information about external device connections, see the operation manual of the external device you wish to connect to the LCD TV.

Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LCD TV.

You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LCD TV.

TV cable input – You can use a commercially available audio/video cable.

Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P or 1080i signal is received.

HDMI input – Picture can be displayed only when a 640 x 480, 480P, 720P or 1080i signal is received. When you connect to the HDMI terminal with a DVI-HDMI conversion cable, there is a possibility that the picture may not display correctly.

Audio output – You can output audio signals from the LCD TV set through the analog audio out and SPDIF terminals.

18

Page 22
Image 22
Westinghouse TX-42F810G manual External Device Connections