SETUP MENUS
33
English
Adjusting View Mode
1
Press the / keys on the remote control to select the desired option.
2 Press or to save and exit the screen.

VIEW MODE (VGA)

Select VGA as your input source and use the View Mode sub-menu to adjust the
display in VGA mode.
Press on the remote control or Menu on the control panel to display the setup
menu screen then select View Mode to display the View Mode sub-menu.
The following options are available:
Aspect Ratio
Use this sub-menu to select the display's aspect ratio in the following options:
•Standard: Picture is displayed in its original size.
•Fill: Picture is displayed to cover the entire screen.
•1:1 Mode: Matches the incoming resolution exactly to the pixels without any
scaling.
Standard Fill 1:1 Mode
Aspect Ratio
16:9
A
H. Position
Use this sub-menu to adjust the display’s horizontal position.
H. Position
16:9
A
V. Po si ti on
Use this sub-menu to adjust the display’s vertical position.
V. Position
16:9
A