Preliminaries
Unpacking Your Loudspeakers
Diamond 10 loudspeakers come in many shapes and sizes. If you are unpacking the larger loudspeakers or a subwoofer, please remember that these units are heavy. We suggest that you have someone to assist you.
Lift the loudspeaker carefully out of the packing. Do NOT try and lift the loudspeaker using the protective bag.
Unpack any accessories carefully.
If there is any sign of damage or if the contents are incomplete, report this to your dealer as soon as possible.
Retain the packing for future safe transport of the product. If you dispose of the packing, do so with respect to any recycling provisions in your area.
Attaching the Spikes to Floorstanding Models - 10.3, 10.4,10.5, 10.6 and 10.7
Make sure you have plenty of unobstructed working space.
Place a soft cloth on the floor to protect the loudspeaker.
Invert the loudspeaker onto the cloth.
Thread a locknut onto each spike and loosely run it up the thread
Thread the spikes onto the spike inserts. Tighten them finger tight.
Invert the loudspeaker. Be careful not to damage the floor with the spikes.
Levelling the Loudspeakers
When the speaker is upright: You will probably find that the speaker
will wobble with one spike not contacting the floor. Adjust this spike until all four spikes are on the floor.
|
| With the aid of a spirit level move each spike in and out until the loudspeaker is |
|
| |||||
|
| level and sitting squarely on all four spikes with no rocking. |
|
| |||||
|
| Now tighten each locknut securely against the collar in the plinth |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
| to secure the spike |
|
|
|
|
|
| |
|
| Screw in rubber feet are provided for use on wood or stone floors |
|
|
|
|
|
| |
|
| etc. and should be attached in the same manner as the spikes. |
|
|
|
|
| Collar | |
|
|
|
|
|
| ||||
Nut |
| ||||||||
|
|
|
| ||||||
|
|
|
| (In Plinth) | |||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Spike | |
Stands and Brackets |
|
|
|
|
|
| |||
|
|
|
|
|
|
| |||
The 10.1 and 10.2 louderspeakers are intended primarily for stand mounting, though they can be mounted on wall brackets or even on sturdy shelves. The quality of louderspeaker stands greatly influences the performance of your loudspeakers so do not use flimsy products.
The 10.0 may be stand or wall mounted.The rear panel has a threaded insert for attaching a pair of suitable wall brackets.
Centre Channel Loudspeakers
Each centre channel loudspeaker is supplied with two sets of mounting feet. By using a combination ofl arge and small feet the loudspeaker may be angled to point directly at the listening position. This will be found useful when the centre speaker is positioned under theTV screen.
Surround Loudspeakers
These speakers are designed primarily for wall mounting, though they may be stand or shelf mounted if required. Please | Page 3 |
see Page 7. |
Looking After Your Loudspeaker
Your Loudspeakers use a specially sealed finish. They should not be waxed or treated with spray polishes which will smear and dim the finish. Occasionally polish them with a dry or barely moist cloth to remove dust and finger marks, etc.
If you play the speakers with the grilles off exercise great care. NEVER operate speakers with the grilles off if there are children or pets in the house.
Occasionally, remove the loudspeaker grilles and brush them gently with a soft brush before replacing them. NEVER use a vacuum cleaner to clean loudspeaker grilles.
NEVER stand objects on your loudspeakers. In particular do not stand flowers etc on them - they are not jardinieres!
Avoid getting any liquid behind the grille. If you accidentally spill liquid on your loudspeakers, take them to your dealer for attention before using them again.
Do not open the speakers; there are no user serviceable parts inside.
Never touch the drive units either with an object or your hands.
Quality Assurance
Your loudspeakers have been constructed to the highest standards. From the top grade furniture construction and finish to the carefully designed and selected acoustic components our speakers are built to provide a lifetime of sonic pleasure. We hope you will derive many years of good service from our products.
Servicing
In the unlikely even that your unit develops a fault you should return it to your Wharfedale dealer using the original packing to ensure safe shipping.
The terms of your guarantee may vary in different countries but in all cases the guarantee excludes: 
Liability for damage or loss occurring in transit to or from the purchaser.
All damage caused through accident, misuse, wear and tear, neglect, incorrect installation, adjustment or repair by unauthorised personnel.
Liability for damage or loss occurring in transit to or from the purchaser.
Wharfedale will not be liable for any consequential damage, loss or injury, arising from or in conjunction with this equipment.
Service Addresses
For technical support, servicing or product queries and information please contact either your local retailer or the offices below.
UK | Asia |
IAG Service Dept. | IAG |
Unit 4 | Room 2310 - 2311 Press Building, |
St Margaret’s Way | Shennan Road C, |
Stukeley Meadows Industrial Estate | Shenzhen, |
Huntingdon | China |
Cambs | Tel: |
PE29 6EB | Fax: |
England |
|
Tel:+44 (0)1480 452561 |
|
Fax: +44 (0)1480 413403 |
|
For information on other authorised service centres worldwide contact Wharfedale International in the U.K. A worldwide distributor list is available on the Wharfedale website: www.wharfedale.co.uk
| 4 | 17 |
|
| |
|
|
|
|
|
|
