Specifications
Loudspeakers
| Parameter | 10.0 | 10.1 | 10.2 | 10.3 | 10.4 | 10.5 |
| Format | Stand mount | Stand mount | Stand mount | Floorspeaker | Floorspeaker | Floorspeaker |
| Bass Driver | – | – | – | – | 125mm | 165mm |
| Bass/mid driver | 100mm | 125mm | 165mm | 125mm | 125mm | – |
| Midrange Driver | – | – | – | – | – | 50mm Dome |
| Tweeter | 25mm | 25mm | 25mm | 25mm | 25mm | 25mm |
| Amplifier power (rec.) | 15 - 75 w | 20 - 100 w | 20 - 100 w | 20 - 100 w | 20 - 120w | 20 - 120w |
| Impedance (Nominal) | 6 Ώ | 6 Ώ | 6 Ώ | 6 Ώ | 6 Ώ | 6 Ώ |
| A/V shielded | yes | yes | yes | no | no | no |
| Sensitivity (1W@1M) | 86 dB | 86 dB | 86 dB | 86 dB | 88 dB | 86 dB |
| Nominal Frequency Range | 55 - 24 kHz | 48 - 24 kHz | 40 - 24 kHz | 40 - 24 kHz | 38 - 24 kHz | 35 - 24 kHz |
| HF Limit | 44 kHz | 44 kHz | 44 kHz | 44 kHz | 44 kHz | 44 kHz |
| Freq. Fb | 55 Hz | 50 Hz | 42 Hz | 42 Hz | 40 Hz | 40 Hz |
| Crossover Frequency | 2.5 kHz | 1.6 kHz | 1.8 kHz | 1.6 kHz | 140hz / 3.8k | 0.6 kHz / 3.8 kHz |
| Dimensions (HxWxD) (mm) | 236 x 145 x 165 | 296 x 194 x 278 | 364 x 223 x 301 | 800 x 194 x 278 | 850 x 194 x 278 | 850 x 223 x 301 |
| Height on feet/spikes (mm)) | – | – | – | 855 | 905 | 880 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* 10.0, 10.1, 10.2 models shown with optional floor stands
Subwoofers
Parameter |
| |||
Bass Driver | 1 x 200mm SUB | 1 x 250mm SUB | 1 x 250mm SUB |
|
A/V shielded | no | no | no |
|
Amplifier power | 100 W | 150 W | 250 W |
|
Line Input Sensitivity | 200mv for 75W | 200mv for 75W | 325mv for 150W |
|
Avg. Max output at 1 metre | 107db | 110db | 113 db |
|
Boundary response | 40 - 110 Hz | 35 - 110 Hz | 30 - 100 Hz |
|
Crossover Range | 35 - 85Hz (6x10dB steps) | 35 - 85Hz (6x10dB steps) | 35 - 85Hz (6x10dB steps) |
|
Dimensions (HxWxD) (mm) | 290 x 290 x 320 | 330 x 330 x 370 | 420 x 420 x 375 |
|
Height on feet/spikes (mm) | 333 | 360 | 478 |
|
|
|
|
|
|
|
|
|
|
|
Specifications liable to change without notice. E&OE
Contents |
|
Cautions | . . . . 2 |
Good Practice Guide | . . . . 3 |
Unpacking the Equipment | . . . . 4 |
Fitting the Spikes | . . . . 4 |
Cables and Connectors | . . . . 5 |
Crossovers | . . . . 5 |
Positioning the Front Loudspeakers | . . . . 6 |
Positioning the Centre Loudspeaker | . . . . 6 |
Positioning and attaching Surround Loudspeakers | . . . . 7 |
Connecting the Front Loudspeakers | . . . . 8 |
Connecting the Centre and Surround Loudspeakers | . . . . 9 |
Diamond 10 Subwoofers | . . . 10 |
Connecting your Subwoofer | . . . 11 |
Operating your Subwoofer | . . . 13 |
Fine Tuning your Subwoofer | . . . 14 |
Setting Up a Home Theatre System | . . . 15 |
Troubleshooting | . . . 16 |
Care, Service and Warranty | . . . 17 |
Specifications | |
Good Practice Guide |
|
Before connecting and using your loudspeakers, please bear the following points in mind: | |
Switch off the amplifier and all sources before making connections to your sound system. When you switch on the | |
system or change sources, set the volume control to minimum and turn up the level gradually. | |
The position of your Volume Control is NOT a reliable guide as to the maximum capabilities of your sound system. Playing | |
the system with extreme settings of volume and tone controls may damage the amplifier and loudspeakers. | |
Do not connect loudspeaker terminals to the mains supply. |
|
Ensure that your loudspeakers are correctly wired and are in phase. |
|
Do not subject your loudspeakers to excessive cold, heat or sunlight. |
|
If you are shelf mounting your loudspeakers, make sure they are not placed on the same shelf as your source components. | |
Do not place heavy objects on top of loudspeaker cabinets. If you play the loudspeakers with the grilles removed be | |
careful to protect the drive units from children and pets. |
|
Do not use makeshift stands. Always fit a manufacturer's approved stand using the instructions and the fixings provided. | |
Your dealer will advise you. |
|
Do not attempt to dismantle the loudspeaker. There are no user serviceable parts inside and you will invalidate the | |
warranty. |
|
Some Front and all Centre loudspeakers are magnetically screened.You should site front loudspeakers at least 0.5 m away | |
from TV sets and magnetic storage media. All Wharfedale centre loudspeakers may be sited close to a TV screen with no | |
adverse effects.The specifications on Pages 20 and 21 have AV shielding details for your loudspeakers. | |
When connecting your loudspeakers, do not run cable across areas of open floor where they may be a source of danger. | |
Run them safely, around room boundaries if necessary. |
|
| Page 1 |
| 18 | 3 |
|
| |
|
|
|
|
|
|