Wharfedale EZ-M 10X2 owner manual 2TK OUT, Main OUT ¼ L/R Outputs, Phones

12	2TK IN
	This section consists of two sets of three
input jacks. The top rows of jacks are the “2TK
IN” input, which includes a 1/8” stereo jack and
left and right RCA jacks. These inputs allow for
an external stereo signal into the mixer. This		12
signal is controlled by the 2TK IN volume control
and the 2TK TO PHONES switch as well as the
2TK TO MAINS switch. When the 1/8” 2TK IN
jack is used, it takes priority over the RCA 2TK
IN jacks.
13	2TK OUT
	This section also consists of two sets of
three output jacks. The bottom row of jacks in
the “2TK OUT” section feature a 1/8” stereo
jack, and left and right RCA jacks. These		13
outputs allow for the routing of MAIN MIX stereo
signal out of the mixer. This signal level is
controlled by the MAIN MIX volume control.
When the 1/8” 2TK OUT jack is used, it takes
priority over the RCA 2TK OUT jacks.
14	MAIN OUT ¼” L/R Outputs
	Left and Right balanced, TRS (Tip, Ring,
Sleeve) ¼” output jacks for connection to
amplifier inputs or recorder inputs. Unbalanced
connections can also be used at these jacks.

15Phones

This is a standard ¼” Tip-Ring-Sleeve (TRS) amplified stereo headphone output jack. A parallel connection to a convenient 1/8” mini stereo headphone jack is also included, allowing for portable headphones and ear buds. Volume is set with the PHONES level control. Be aware

that very high volume levels are possible

from this output! Make sure the level is set all the way down before connecting headphones.

14

15

8