Wharfedale S-1500, S-2500, S-1000 Getting Started, AC Power Connections, Packing, Safety, Warranty

S-SERIESProfessional Amplifiers

Getting Started

1.AC Power Connections

All S-Series power amplifiers are equipped with an internal AC power supply. Connect the appropriate grounded IEC power cable to the power amp BEFORE connecting it to the power outlet.

It is important to allow adequate ventilation to the powered mixer as it may become warm during extended periods of operation.

Each S-Series amp is shipped with the correct power cable for the country in which it is to be used. The S-Series amps are NOT to be used in a country using a different source supply voltage other than for which it is designed. Note the operating voltage shown near the AC power cord jack and ONLY connect this unit to the appropriate AC source voltage.

2.Packing

The packaging has been designed protect the mixer during transit. If any shipping damage has occurred, consult your dealer and the shipping provider.

3.Safety

Avoid excessive heat, humidity, dust and vibration. Store and operate the power amplifier away from high temperatures or humidity. Also, avoid locations which may be subject to excessive dust and vibration / physical shocks that could cause mechanical damage to the amp.

WARNING: REFER ALL MAINTENANCE, REPAIRS AND MODIFICATIONS TO QUALIFIED SERVICE PERSONNEL! THIS PRODUCT CONTAINS NO USER-SERVICEABLE PARTS!

For the protection of the amplifier and other audio equipment, always turn off the power on the amplifier and other system components before connecting or disconnecting audio cables.

4.Warranty

The S-Series power amplifiers are covered, by limited warranty, of any defects in workmanship for a period of one year from the date of purchase. This warranty is non-transferable and applies only to the original purchaser. If any warranty related issues occur, contact your dealer.

4