FRONT PANEL - FEATURES AND CONTROLS
1.Power switch: Push to turn power on or off.
2.Power On LED: This LED lights when the power is on for the amplifier.
3.Protect LED: This LED will light up when a fault is detected in the amplifier operation.
4.Bridge LED: This LED lights up when the amplifier is set to BRIDGED mode.
5.Peak A LED: This LED indicates overload of the signal of Channel A
6.Peak B LED: This LED indicates overload of the signal of Channel B
7.Channel A Signal Present LED: Indicates presence of signal on Channel A.
8.Channel B Signal Present LED: Indicates presence of signal on Channel B.
9.Channel A Signal Level Control: This knob controls the output level of Channel A.
10.Channel B Signal Level Control: This knob controls the output level of Channel B.
2 | 3 | 4 | 5 | 6 | 7 | 8 |
Power | Protect | Bridge | Peak A | Peak B | Signal | 4 | 5 | 6 | 4 | 5 | 6 | Signal |
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
| 3 |
| 7 | 3 |
|
| 7 |
|
|
|
|
|
| 2 |
| 8 | 2 |
|
| 8 |
|
|
|
|
|
| 1 |
| 9 | 1 |
|
| 9 |
| Professional Amplifier | CH. A | 0 |
| 10 | 0 |
| 10 | CH. B |
1 | 9 | 10 |
5