BINDING POST WIRING OPTIONS
BRIDGED
MONO 
A | B |
| BRIDGE |
As shown in the graphic above, the stereo and bridged mono applications can be connected as indicated. Binding post wiring can be done with spade connectors, bare wire ends tightened into the binding posts or via banana plugs inserted into the end of the binding posts.
CONNECTING BARE ENDED SPEAKER CABLE LEADS
NEGATIVE | POSITIVE |
LEAD TO | LEAD TO |
SPEAKER | SPEAKER |
_ 
A 
+
Strip away approximately ½” (12mm) of insulation from the speaker wire. Twist the bare copper wire ends tightly. Unscrew each binding post, insert the wire into the hole in the metal portion of the binding post and tighten the binding post securely. Be care of stray wire strands that could cause shorts.
11
