Powered Mixers | SPX613 & SPX815 |
Getting Started
1. Power Supply
The SPX Series powered mixers are supplied with an internal AC power supply. Connect the appropriate grounded IEC power cable to the SPX mixer BEFORE connecting it to the power source outlet. It is important to allow for adequate ventilation for the powered mixer as it may become warm during long periods of operation. Be sure to allow for free air flow around the powered mixer to minimize excessive heat
Each SPX mixer is shipped with the correct power supply and cable for the country in which it is to be used. The SPX mixer is NOT to be used in a country using a different source supply voltage other than for which it is designed. Note the operating voltage shown near the AC power cord jack and ONLY connect this unit to the appropriate AC source voltage.
2. Packing
The exterior and interior packaging has been designed to protect the mixer during transit. If any shipping damage has occurred, consult your dealer and the shipping provider.
3. Safety
Avoid excessive heat, humidity, dust and vibration. Store and operate the powered mixer away from locations where it is likely to be exposed to lack of ventilation, high temperatures or humidity. Also, avoid locations which may be subject to excessive dust and lint or vibration / physical shocks that could cause mechanical damage to the powered mixer.
WARNING: REFER ALL MAINTENANCE, REPAIRS AND MODIFICATIONS TO QUALIFIED
SERVICE PERSONNEL! THIS PRODUCT CONTAINS NO
For the protection of the powered mixer and other audio equipment, always turn off the power on the powered mixer and other system components before connecting or disconnecting audio cables.
4. Warranty
The SPX Series mixers are covered, by limited warranty, of any defects in workmanship for a period of one year from the date of purchase. This warranty is
, | Page 3 |
WHARFEDALE PRO SPX613 / SPX815 OWNER S MANUAL |
