Attaching the Seat Back and Seat Bottom Cushion
Your pedicure spa shipped with the seat back already attached to the spa and with the seat bottom
cushion in the spa shipping box. Follow these instructions to connect the seat back and the seat bottom to the pedicure spa:
Seat Back Attachment
Step 1: Remove the hitch and clevis pins located on the seat back mounting bracket on the back of the chair.
Step 2: Slide the seat bracket into the black end on the linear actuator, and line up the holes.
Seat Bottom Attachment
Step 1: The seat bottom cushion will be
located in the spa on top of the spa basin.
Remove the seat bottom cushion from the
spa basin.
Step 2: With the Chair fully reclined, attach the seat bottom cushion to the spa, aligning the seat bottom cushion with the provided Velcro strips. Ensure that the rear of the seat bottom cushion is tight
against the seat back.
Step 3: Slide the clevis pin through the holes and secure by inserting the hitch pin through the small hole on the clevis pin.
Please make sure that all parts are removed from the box before discarding the box. If any parts are missing, you must contact EUROPEAN TOUCH within 30 days of the delivery date for replacement at
Document ID:15080000 | Rev: E | Technical Support: | Page 12 of 20 |